SAE J1887 Automotive Compacted Graphite Iron Castings
时间:2024-04-28 01:23:44 来源: 标准资料网 作者:标准资料网 阅读:8788
Product Code:SAE J1887
Title:Automotive Compacted Graphite Iron Castings
Issuing Committee:Automotive Iron And Steel Castings Committee
Scope:This SAE Standard covers the mechanical and physical requirements for Compacted Graphite Iron (CGI) castings used in automotive and allied industries. Requirements in this document include:a. Tensile Strengthb. Yield Strengthc. Elongationd. Graphite MorphologyAppendix A provides general information on application of this material along with additional data on mechanical and physical properties not specified but useful as a design reference. Appendix B provides a Compacted Graphite Iron Percent Nodularity Rating Chart not specified but useful as a visual reference.
基本信息
标准名称: | CTK4104型有可靠性指标的非密封多层片状瓷介固定电容器详细规范 |
英文名称: | Detail specification capacitors, chip, multiple layer, fixed, unencapsulated, ceramic dielectric, established reliability Type CTK4104 |
中标分类: |
石油 >>
石油综合 >>
技术管理 |
发布部门: | 中华人民共和国电子工业部 |
发布日期: | 1993-05-11 |
实施日期: | 1993-07-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
提出单位: | 机械电子工业部 |
起草单位: | 电子工业部标准化研究所 |
出版社: | 电子工业出版社 |
出版日期: | 1993-06-01 |
页数: | 3页 |
适用范围
本规范规定了CCK4104型有可靠性指标的非密封多层片状瓷介固定电容器的适用范围、外形结构、尺寸、主要参数和要求。本规范适用于在电路作中作旁路、耦合或对于损耗和电容量稳定性要求不高难的电路中使用的多层片状瓷介固定电容器。本规范规定的电容器的完整要求由本规范和总规范GJB192组成。
前言
没有内容
目录
没有内容
引用标准
GJB 192-1986 有可靠性指标的非密封多层片状瓷介固定电容器总规范
GB 2471-1981 电子设备用电阻器的标称阻值系列和固定电容器的标称容量系列及其允许偏差系列
所属分类: 石油 石油综合 技术管理
基本信息
标准名称: | 铜及铜合金化学分析方法 锌量的测定 |
英文名称: | Copper and copper alloys-Determination of lead content |
中标分类: |
冶金 >>
金属化学分析方法 >>
重金属极其合金分析方法 |
ICS分类: |
冶金 >>
有色金属 >>
铜和铜合金
|
替代情况: | 替代GB 5121.3-1985;GB 5122.2-1985;GB 5122.19-1985;GB 6520.11-1986;GB 8002.4-1987;GB 8002.5-1987;被GB/T 5121.3-2008代替 |
发布部门: | 国家技术监督局 |
发布日期: | 1996-11-04 |
实施日期: | 1997-04-01 |
首发日期: | 1985-04-24 |
作废日期: | 2008-12-01 |
主管部门: | 中国有色金属工业协会 |
提出单位: | 中国有色金属工业总公司 |
归口单位: | 全国有色金属标准化技术委员会 |
起草单位: | 洛阳铜加工厂、沈阳有色金属加工厂、中国有色金属工业总公司标准计量研究所 |
起草人: | 张德来、陈德润、覃彦 |
出版社: | 中国标准出版社 |
出版日期: | 1997-04-01 |
页数: | 5页 |
适用范围
本标准规定了铜及铜合金中铅含量的测定方法。本标准适用于铜及铜合金中铅含量的测定,测定范围:0.001 5%~5.00%。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 冶金 金属化学分析方法 重金属极其合金分析方法 冶金 有色金属 铜和铜合金